bootmod3 B48 B46 - MINI F54 F55 F56 F57 F60 Cooper S JCW Tune
Engine BMW engine
License bundle Flasher + monitor + maps
Delivery Digital license
Build data

Specs that matter for this part

Hardware

Flasher and map packs

Unlocks MHD flashing plus the matching map packs for the selected engine platform.

Validation

Live monitoring tools

Monitor boost, lambda, intake temperature, and other key data while validating the calibration.

Requirement

Unlock and adapter check

Confirm ECU support, unlock status, and compatible flashing hardware before purchase.

Digital tuning products depend on ECU compatibility, unlock status, fuel quality, and supporting modifications.

World's First, Most Advanced and Widely Adopted Cloud-Based Flash Tuning Platform for BMW F/G Series, A90/A91 Supra & MINI

World's First, Most Advanced and Widely Adopted cloud-based flash tuning platform for the BMW F and G series vehicles, A90/A91 Supra and MINI.

Cloud-based solution with a web-based interface for use with a laptop or with our mobile apps built for iOS and Android! Developed and tested in-house from the ground up since its debut in November 2016 with new features and updates being added regularly makes the bootmod3 platform a custom MINI factory DME tuning solution like no other on the market since.

Build the ultimate tune for your MINI with its B46/B48 engine and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.

B48-H (High Compression) Models

  • Stage 1 ACN91 octane: up to 30% HP / 32% TQ
  • Stage 1 91 octane: up to 40% HP / 43% TQ
  • Stage 1 93 octane: up to 42% HP / 44% TQ
  • Stage 2 ACN91 octane: up to 45% HP / 46% TQ
  • Stage 2 91 octane: up to 50% HP / 48% TQ
  • Stage 2 93 octane: up to 54% HP / 50% TQ

B48-L (Low Compression) Models

  • Stage 1 ACN91 octane: up to 10% HP / 13% TQ
  • Stage 1 91 octane: up to 12% HP / 15% TQ
  • Stage 1 93 octane: up to 14% HP / 16% TQ
  • Stage 2 ACN91 octane: up to 15% HP / 16% TQ
  • Stage 2 91 octane: up to 19% HP / 18% TQ
  • Stage 2 93 octane: up to 22% HP / 20% TQ

bootmod3 App & Cloud Services Features

  • Mobile app (iOS and Android) and Web (http://www.bootmod3.net) including Windows and macOS support
  • One OTS map/tune included with the purchase and any other maps labeled as "FREE"
  • Datalogging hundreds of diagnostic channels with the highest throughput and sample rates available
  • Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
  • Cloud-based storage for map data and datalogs
  • Reverting back to stock performance map and re-locking the DME to stock programming
  • Live Dash - realtime vehicle parameter monitoring via in-app gauges
  • Diagnostics
  • Read and clear trouble codes in all vehicle modules
  • Reset learned adaptations (octane, knock, Valvetronic, etc)
  • ECU power reset
  • (Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane ( SEE HERE )
  • (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

Custom Map Features

  • Map Customization through Map Editor
  • Exhaust Burble adjustments on any map (OTS & Custom)
  • Cold start (cat heating on startup) removal for quieter cold start
  • Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
  • Exhaust Flap Adjustments (Sport Mode)
  • Top Speed Limiter Removal
  • Boost By Gear % Reduction
  • Re-calibrated Sport Gauges on iDrive
  • E85/blend, RaceGas, and Meth Injection Tuning

Supported B46 / B48 MINI Vehicles

(If your vehicle is not listed please inquire with us)

  • 2015-2019 F54 (Includes JCW models)
  • 2014-2019 F55
  • 2014-2019 F56 (Includes JCW models)
  • 2014-2019 F57 (Includes JCW models)
  • 2015-2019 F60 (Includes JCW models)

Minimum Mobile & Desktop OS Requirements

  • iOS 13 or higher
  • Android 5.0 or higher
  • Windows 10 or higher
  • macOS 10.15 (Catalina) or later

Additional Information

For more info take a look at the FAQ here!

*** bootmod3 WiFi Adapter or OBD ENET cable required, available separately

*** Vehicles with November 2019+ software updates require DME unlock done on the bench to enable OBD flashing. If you have the November 2019+ software update, feel free to contact support@protuningfreaks.com for details

Vehicle Manufacturer Warranty & Emissions Disclaimer

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Terms & Conditions

bootmod3 software and hardware Terms and Conditions

Recently Viewed